Home Charging Station 11kW | Type 2 Three-Phase | Display, RFID & App

Fixed EV charging station (wallbox), 11kW three-phase, with a 5 m Type 2 cable – fast home charging at your private parking spot, with an LCD display, RFID cards and full control from the app.

Specifications

• Connector type: Type 2 (IEC 62196-2)
• Power: 11kW
• Power supply: three-phase, 380V–440V
• Adjustable charging current: 6A / 8A / 10A / 13A / 16A – can be changed from the station or the app, even while charging
• Cable: 5 m, 5G 2.5mm²+1×0.5mm², TÜV-certified cable
• Water and dust resistance: IP66 – suitable for outdoor installation, even in the rain
• Housing: UL94 V-0 rated flame-retardant material
• Operating temperature: from -30°C to 55°C
• Dimensions: 160 × 330 × 88 mm
• Certifications (per the manufacturer's declaration): CE, FCC, CSA, UKCA, KC

Smart and convenient

• Tuya / Smart Life app (Wi-Fi): start and stop charging remotely, change the current, schedule charging for off-peak hours, track consumption and get a notification when the car is fully charged.
• LCD display: rated current and charging current, voltage, power, energy charged (kWh), charging time, delayed charging, temperature and Wi-Fi signal strength.
• RFID cards: 3 cards included – only someone holding a card can start charging.
• Delayed charging (Delay): set a start time directly from the station or from the app.

Built-in protections

• Leakage (RCD) protection, with automatic recovery
• Over-voltage and under-voltage protection (self-test and recovery)
• Over-current and short-circuit protection
• Overheating protection – automatic cut-off above 85°C
• Earthing protection and lightning protection
• Red emergency button on the side of the station

Warranty

24 months warranty.

What's in the box

• Charging station with Type 2 cable and connector (5 m)
• Wall mounting bracket and charging connector holder
• 3 RFID cards
• Screws and wall plugs for installation
• User manual

Installation – good to know before you order

• No plug – the station is wired directly to the electrical panel and is intended for permanent installation by a licensed electrician only, on a dedicated circuit with a suitable breaker and RCD, in accordance with the Israeli Electricity Authority guidelines.
• After installation, an inspection by a licensed electrical inspector is required before first use. The protection in the panel is determined by the guidelines: a Type B RCD, or a Type A/F RCD combined with DC leakage detection.
• A three-phase 3×16A supply is required. The manufacturer's wiring diagram shows a 4P 20A breaker – the final choice of breaker and cable will be made by the electrician.
• Want to charge faster? Cars that support 22kW AC charging can charge faster with our 22kW model.

Not sure which model suits your home and your car? Message us on WhatsApp and we'll help you choose.