Home Charging Station 22kW | Type 2 Three-Phase | Display, RFID & App

Fixed EV charging station (wallbox), 22kW three-phase, with a 5 m Type 2 cable – fast home charging at your private parking spot, with an LCD display, RFID cards and full control from the app.

Specifications

• Connector type: Type 2 (IEC 62196-2)
• Power: 22kW
• Power supply: three-phase, 380V–440V
• Adjustable charging current: 6A / 8A / 10A / 13A / 16A / 20A / 24A / 32A – can be changed from the station or the app, even while charging
• Cable: 5 m, 5G 6mm²+1×0.5mm², TÜV-certified cable
• Water and dust resistance: IP66 – suitable for outdoor installation, even in the rain
• Housing: UL94 V-0 rated flame-retardant material
• Operating temperature: from -30°C to 55°C
• Dimensions: 160 × 330 × 88 mm
• Certifications (per the manufacturer's declaration): CE, FCC, CSA, UKCA, KC

Smart and convenient

• Tuya / Smart Life app (Wi-Fi): start and stop charging remotely, change the current, schedule charging for off-peak hours, track consumption and get a notification when the car is fully charged.
• LCD display: rated current and charging current, voltage, power, energy charged (kWh), charging time, delayed charging, temperature and Wi-Fi signal strength.
• RFID cards: 3 cards included – only someone holding a card can start charging.
• Delayed charging (Delay): set a start time directly from the station or from the app.

Built-in protections

• Leakage (RCD) protection, with automatic recovery
• Over-voltage and under-voltage protection (self-test and recovery)
• Over-current and short-circuit protection
• Overheating protection – automatic cut-off above 85°C
• Earthing protection and lightning protection
• Red emergency button on the side of the station

Warranty

24 months warranty.

What's in the box

• Charging station with Type 2 cable and connector (5 m)
• Wall mounting bracket and charging connector holder
• 3 RFID cards
• Screws and wall plugs for installation
• User manual

Installation – good to know before you order

• No plug – the station is wired directly to the electrical panel and is intended for permanent installation by a licensed electrician only, on a dedicated circuit with a suitable breaker and RCD, in accordance with the Israeli Electricity Authority guidelines.
• After installation, an inspection by a licensed electrical inspector is required before first use. The protection in the panel is determined by the guidelines: a Type B RCD, or a Type A/F RCD combined with DC leakage detection.
• A three-phase 3×32A supply is required. The manufacturer's wiring diagram shows a 4P 40A breaker – the final choice of breaker and cable will be made by the electrician.
• Actual charging speed is also limited by the car's on-board charger (OBC). Many cars accept up to 11kW AC – in such a car, a 22kW station will charge at 11kW.

Not sure which model suits your home and your car? Message us on WhatsApp and we'll help you choose.